3M 6000 Series Asbestos Respirator Kit

Convenient respiratory kit designed for asbestos removal and environments containing dust.

The kit comes complete with the 3M™ Full Face 6000 Series Respirator which is light weight and easy to use. It also includes two pairs of 3M™ Particulate Filters 6035 P2/P3. Kit also contains 3M Respirator Cleaning Wipes, 3M Earplugs and a handy storage container

The unique solid top particulate filter casing design reduces premature caking and clogging from dirt, grime, water or dust. The protective casing also aids decontamination practices. Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant IDLH levels.

Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator. Cartridge or filter type: P3 Face-piece type, Full face-piece reusable; Size: Small, Medium, Large.

Features

• Convenient respiratory kit designed for asbestos removal and environments containing dust.
• The kit comes complete with the 3M™ Full Face 6000 Series Respirator which is lightweight and easy to use.
• Includes two pairs of 3M™ Particulate Filters 6035 P2/P3*.
• Unique solid top particulate filter casing design reduces premature caking and clogging from dirt, grime, water or dust.
• Protective casing aids decontamination practices.
• Common Applications/Hazards: Suitable for certain asbestos work, lead paint removal, sanding, sawing, drilling, cutting, grinding, masonry, insulation and hazardous particulates such as silica & beryllium. •
• Environments requiring face and eye protection.

Common Applications/Hazards:

• Suitable for certain asbestos work requiring higher protection levels: Refer to local asbestos government guidelines (Worksafe NZ)
• Lead paint removal.
• Sanding.
• Sawing.
• Drilling.
• Cutting.
• Grinding.
• Masonry.
• Insulation and hazardous particulates such as silica & beryllium.
• Environments requiring face and eye protection.

Standards

• Meets the performance requirements of AS/NZS 1716:2012.

This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:

• With a 3M 6000 Full Face Respirator:
  • 100 times the Workplace Exposure Standard (WES) or 30 ppm, whichever is the lower.